HOT ! Apple Watchband

HANDCRAFTED IN NORFOLK, VIRGINIA

These are the exact same watch straps as my non-Apple version watch straps that I make except these include the \"Apple adaptors\" to allow you to slide them onto an Apple Watch.  I make these straps from a single piece of thick belt leather.  The buckle end has a fixed metal keeper to tuck the tail under as well as an additional leather keeper that moves freely. If you ever wanted to remove the Apple hardware and attach the watch strap to a regular watch (assuming it was the correct width for your watchface), you would just use a needle or watch tool to remove the pins from the adaptors and switch it over.

The smaller Apple Watch faces (38mm / 40mm / 41mm) will come on a band that is 22mm wide and the large Apple Watch faces (42mm / 44mm / 45mm / 46mm) will come on a band that is 24mm wide.

The Apple Watch in my photos is an earlier version 38mm watch with a brown watchband in the regular length.  I\'m using the 3rd smallest out of 6 holes.  My wrist measures 6.5\" with a piece of thread and about 6.75\" with a piece of paracord.

(This is my wife\'s old watch that our son broke.  And yes, if you were wondering why the screen looks like leather, it is!)