HOT ! Hawk 13\" 2-Speed HD Professional Floor Machine – 175/320 RPM, 1.5 HP

175/320 RPM Dual-Speed 13\" Floor Machine for Scrubbing and High-Speed Buffing

The Hawk Enterprises 13\" 2-Speed HD (F03-13-01) runs a 1.5 HP DC rectified motor through 10:1 helical-cut gears at 175 RPM for stripping and scrubbing, or 320 RPM for spray buffing and finish maintenance. The higher top speed relative to the XHD model makes it the choice when high-speed buffing quality is the priority over maximum torque at low speed. At 87 lbs and 13 inches, it accesses tight commercial spaces while still providing full dual-purpose floor care from one machine.

Dual-Speed Specs for Maintenance and Restoration Applications

• 
  175/320 RPM, 1.5 HP DC rectified, 7.8/8.2A — 175 RPM for stripping, scrubbing, and prep work with black and blue pads; 320 RPM for spray buffing, interim maintenance, and finish restoration with red and white pads from the same 13-inch machine.


• 
  10:1 helical-cut gears, all-steel frame — 10:1 ratio optimized for balanced performance across both speed ranges; all-steel powder-coated construction provides long-term durability under daily commercial use.


• 
  62–69 dB, GS42 compliant — both operating speeds fall within GS42 limits; 62 dB at low speed qualifies for daytime use in occupied healthcare and educational facilities.


• 
  50-ft cord, dual steel triggers, foam grips — 50-ft industrial cord covers most commercial floor areas from a single outlet; foam grips on the ergonomic handle reduce hand fatigue during extended cleaning shifts.

Where the 13\" HD 2-Speed Is Used

Commercial cleaning companies use the F03-13-01 as a single versatile machine for smaller commercial accounts including medical offices, retail stores, and small restaurants where separate stripping and buffing machines would not be economical. Facility maintenance teams in assisted living and nursing home facilities use the compact 13-inch footprint for resident-room and corridor floor strip-and-buff cycles without requiring a separate high-speed burnisher. School custodial staff use the 175 RPM setting for periodic gym and corridor stripping, then switch to 320 RPM for interim buffing between full refinish cycles. Building service contractors deploying to small-footprint accounts — law offices, dental practices, and boutique retail — use this machine where a 17-inch or 20-inch unit would be difficult to maneuver or store.

Specifications

Documents

Spec Sheet

Owner\'s Manual