HOT ! Kit Rocket 24v Counterweight Overhead Door + Accessories + No Welding Encoder

Complete kit for the automation of overhead doors with counterweights at 24VWITH ENCODER and ANTI-CRUSHING

Mod. KIT-ROCKET-ACS-24V

+ N.1 LED FLASHING LIGHT+ N.1 PHOTOCELL CP+ N.1 EXTERNAL RELEASEfor Intensive UseProfessional

The Rocket gearmotor is suitable for operating counterweight overhead doors with a maximum surface area of approximately 9 m2.It is equipped with a mechanical release system that allows the use of the door in the absence of electricity.It is supplied as standard with opening and closing limit switches.It can be equipped with courtesy light and electronic equipment with slowdown.

WE RECOMMEND INSTALLING THIS AUTOMATION WHEN THE SPACE BETWEEN THE DOOR AND THE CEILING IS LESS THAN 10CMSUITABLE FOR DOORS THAT DO NOT EXCEED 3 METERS IN WIDE.

Characteristics:Irreversible electromechanical gearmotor.Opening and closing limit microswitches.Built-in release lever.Electronic slowdown during closing/opening.Electronic torque regulation.24 Vdc power supply.Anti-crushing.

KIT COMPOSITION:n° 1 24v electromechanical gearmotor with built-in limit switch.n° 1 control unit positioned in the engine crankcase, with trimmer for regulating the engine force, ENCODER and obstacle detector, slowdown in opening and closing, 4 operating logics: step-by-step, semi-automatic 1 and 2, condominium automatic. Courtesy light, Overvoltage protection, Photocell input, safety edges.n° 1 Single-channel radio receiver incorporated in the control unit (433.9 MHz)n° 1 Antenna incorporated into the control unit, range 20 meters (433.9MHz)n° 1 4-channel remote controln° 1 Kit of 2 straight armsn° 2 transmission shaftsn° 1 Galvanized spar 1.50mn° 1 Internal emergency releasen° 1 Set of screws and brackets for mountingn° 1 Flashing LEDn° 1 Pair of photocellsn° 1 External releasen° 1 Assembly instructions for the mechanical and electronic parts in ITALIAN

24 month warranty